Radon Testing: 3 Key Things Every New York Homeowner Should Know
Radon gas is a colorless, tasteless, and odorless gas that is the second leading cause of lung cancer, according to the CDC. Formed naturally when uranium, thorium, or radium break down in the rocks, soil, and water around your home, radon is a radioactive gas that is responsible for over 20,000 lung cancer deaths per year in the United States alone. According to the United States Environmental Protection Agency (EPA), having your home tested for radon is recommended before you buy or sell a home.
No home is immune to radon problems, whether they are new or old. Because this is where you spend a majority of your time, you get the greatest radon exposure within your house. Having a certified radon tester assess the radon levels in your home can alert you to a problem that you may not even have discovered otherwise. According to the EPA, it is estimated that one out of every fifteen homes to have elevated radon levels in the U.S.
Testing for radon is a fairly straightforward process, and you should consult with a certified radon tester to ensure that you are getting the most accurate and thorough results. It’s an important measure you should take in order to promote the safety of everyone in your home. When you get started with radon testing, every homeowner should keep in mind.
Radon levels will always vary from home to home, whether it is old or new, drafty or insulated. It also depends on the types of building materials used, local geology, and other important factors. Every home is different, and your neighbor’s radon levels are no indication of what your home’s radon levels might be.
Testing for radon should be done by a certified home inspector or radon tester who is equipped with the best techniques to get the most accurate measurements. Not only can they give you more precise readings, they can also make suggestions to help you deal with the issues on your property.
If you get your home tested for radon, and the levels are elevated, you should be aware that radon problems can be fixed. With radon mitigation systems, you can reduce the radon levels in your home to a reasonably low output.
What Are Dangerous Radon Levels In A Home Property
Once you get your home tested for radon in New York, you can take action when determining what your radon levels are. Levels over 4 pCi/L or higher are considered dangerous. Below 4 pCi/L can still pose a threat, but reducing these levels can be achieved.
Common Radon Mitigation Systems
There are a variety of methods and common radon mitigation systems your certified radon tester can advise you on. Sub-slab suction ventilates the radon directly underneath the home’s foundation, allowing it to be released outside. Drain tile suction involves penetrating into the drain tile with a pipe to achieve the same result of venting the gasses outside. Sub-membrane mitigation systems are primarily used in crawl spaces where a plastic sheet covers dirt and is sealed to the wall. A pipe is then placed into the plastic sheeting to pull the gasses out of the crawl space, venting it outside.
How Does Radon Gas Detection Work
At Optima Home Inspections, we are an International Association of Certified Home Inspectors (InterNACHI) Certified Radon Tester in New York that have industry leading equipment and years of training to give you the most accurate radon testing and provide you with a variety of solutions to keep your home safe. With specialty solutions and radon gas testing techniques, we are a #1 Poughkeepsie radon gas inspector dedicated to delivering the best results. Contact us at (845) 210-9930 to schedule your radon test today.